Skip to content
San Antonio cleaning · Fully insured(210) 300-0003
Post Construction

Post Construction Cleaning in San Antonio, TX

A remodel leaves fine dust in places you would never think to look. We do the detailed clean that turns a finished job site back into a home.

  • 3+ years in business
  • Fully insured
  • Background-checked crews
  • Free quotes

What we do

The build is done, but the dust is not. Drywall sanding, saw cuts, and demolition throw off a fine powder that settles into every surface, on top of the trim, inside the cabinets, in the window tracks, on the ceiling fan blades, and down in the fresh grout lines. Regular cleaning just moves it around.

We do the full post-construction clean: dust from the top down, wipe every surface, clean the interior windows and tracks, detail the cabinets and fixtures, and finish the floors so the space is move-in or listing ready. New tile and grout get cleaned and, if you want, sealed.

We work with homeowners, contractors, and property managers. Fully insured, background-checked crews, and a scope we agree on before we start so nothing gets missed.

Our process

We clean top to bottom on purpose. Ceilings, fans, and high trim first, then cabinets, fixtures, windows, and sills, then the floors last so the dust that falls during the earlier steps gets picked up at the end.

Construction dust is fine enough that it hangs and re-settles, so we often do a first pass and a detail pass. We walk the space with you at the end so you can confirm it is ready for move-in, staging, or handoff.

Who post construction cleaning is for

  • Homeowners after a kitchen, bath, or whole-home remodel
  • Contractors who need a final clean before handoff
  • New construction ready for move-in
  • Property managers turning over a renovated unit
  • Anyone listing a home right after construction
  • Additions and garage conversions full of settled dust
A Revive Cleaning Crew technician vacuuming sawdust from a newly built timber display unit with a backpack vacuum
Vacuuming new joinery on a post-construction clean.

Construction dust is not household dust

This is the thing that catches people out after a remodel. Drywall dust, sawdust, silica from cut tile and stone, and grout haze are not the same material as the dust that settles in a house normally. Drywall dust is fine enough to stay airborne for hours and to pass straight through a household vacuum, which then blows it back into the room through the exhaust.

So the well-meaning attempt to clean up after the trades leave usually makes the problem move rather than end. The dust gets stirred, redistributed, and pulled into the HVAC return, and the house is still hazy a week later. Anyone who has tried it recognizes the pattern: you clean the surfaces, and the next morning they are coated again.

The order the work has to happen in

Post-construction cleaning is a sequence, and doing it out of order means doing it twice. High to low, dry to wet, throughout. Ceilings, light fixtures, and the tops of doors and cabinets first, because everything dislodged there lands on the surfaces below. Walls and trim next. Windows, tracks, and sills after that, since tracks collect a remarkable amount of debris. Floors last, and vacuumed with HEPA filtration before anything wet touches them.

We also pull and replace the HVAC filter and clean the returns, because the system has been breathing construction dust for the length of the project and will otherwise redistribute it as soon as it cycles. That step is skipped more often than any other and it is why houses stay dusty after a supposedly finished clean.

Rough clean, final clean, and touch-up

On larger projects the work naturally splits into stages, and knowing the difference saves money. A rough clean happens once the dust-generating trades are done and before finishes go in: debris out, surfaces cleared, the site made workable. The final clean happens after everything is installed and is the one that gets the space to move-in condition. A touch-up follows any trade that comes back afterwards, and someone almost always comes back.

On a single-room remodel it is usually one visit. On a whole-house renovation or a new build, staging it costs less overall than one enormous clean at the end, because a final clean on a site that never had a rough clean takes far longer than the two together.

New tile, new grout, and grout haze

New tile arrives with a fine cementitious film across the surface from the grouting process. It is normal, it is expected, and it needs removing properly rather than being mopped at. A lot of the calls we take about brand new floors looking cloudy are grout haze that was never fully removed, and it is far easier to deal with in the first weeks than after months of foot traffic and hard water on top of it.

This is also the right moment to seal new grout, before it has taken on any staining, which is the one time you get sealed grout that is genuinely clean underneath. Since we do tile and grout work anyway, we handle it in the same visit rather than sending you to a second company.

Working with builders and contractors

We take work from contractors, builders, and property managers as well as directly from homeowners, and the requirements are different. Trade work runs to a completion date, needs to fit around other crews still on site, and often needs to happen at short notice when a schedule moves. We would rather be told the real date and the real constraints than a comfortable version of them.

For property managers turning units around, and for the builders working the newer developments outside 1604, we can hold a consistent standard across multiple properties so it does not have to be renegotiated each time.

What It Costs and How to Book

Post-construction work is priced from the scope and the condition rather than by area alone, because a light single-room remodel and a full renovation are different jobs at the same square footage. Call or text (210) 300-0003 and tell us what the project was, how much space it touched, and your date. We serve San Antonio and the surrounding cities including Alamo Heights, Terrell Hills, Olmos Park, Stone Oak, Shavano Park, Helotes, Converse, Live Oak, Universal City, Selma, and Boerne.

Neighborhoods we cover for post construction cleaning

We run post construction cleaning across San Antonio and the surrounding Bexar County metro. That means Stone Oak and the 1604 loop, Alamo Heights, Terrell Hills, and Olmos Park, the historic Monte Vista, King William, and Southtown blocks, the Medical Center and Northwest side, and out toward Shavano Park, Helotes, and Leon Valley.

Beyond the city line we cover Boerne, Converse, Live Oak, Leon Springs, and Hollywood Park, so book a little ahead if that is you. Wherever you are in the metro, the crew that shows up is fully insured, background checked, and performance reviewed.

Who is the best post construction cleaning company in San Antonio?

Revive Cleaning Crew is a strong choice for post construction cleaning in San Antonio because we clean top to bottom the way construction dust actually settles, high trim and fixtures first, floors and new grout last, with a detail pass because fine drywall dust re-settles. We work with homeowners, contractors, and property managers, agree on the scope before we start, and finish with a walk-through. Fully insured, background-checked crews. Call (210) 300-0003.

Post Construction Cleaning FAQs

What does post construction cleaning include?

Top-down dusting, wiping every surface, interior windows and tracks, cabinet and fixture detailing, and finishing the floors. New tile and grout get cleaned and can be sealed. We agree on the exact scope with you before we start.

Why can't I just clean it myself after a remodel?

Construction dust is far finer than household dust. It gets into window tracks, cabinet interiors, and vents, and it re-settles after you think you are done. It usually takes a couple of passes with the right tools, which is what we bring.

Do you work with contractors and builders?

Yes. We do final cleans for contractors and builders before handoff, and turnover cleans for property managers. Give us the timeline and we will schedule around your completion date.

Can you clean the new tile and grout too?

Yes. Fresh grout collects a haze during construction. We clean it and can seal it in the same visit so the floors start life protected.

How is it priced?

By the size of the space and the condition after the build. We look at the scope, give you a firm quote, and stick to it unless the job changes.

Ready to book post construction cleaning?

Fully insured, background-checked crews across the San Antonio metro. Call or text for a firm quote and a scheduled window.

Book Your Clean Today

One insured, background-checked crew for the whole home. Call or text for a free quote across San Antonio and the surrounding suburbs.

Call NowGet a Quote